Spray Pattern Adjustment
Adjust Spray Shape
The spray pattern shape is adjusted by turning the
adjustment ring to either the vertical or horizontal
positions. The positions of the air cap and the
corresponding spray pattern shapes are illustrated
below.
Test each pattern and use whichever pattern is
suitable for your application.
nEVER trigger the gun while
adjusting the ears on the air cap.
nEVER point the spray gun at any
part of the body.
=
=
Horizontal pattern
=
=
Vertical pattern
=
=
© Wagner Spray Tech - All Rights Reserved
Adjustment ring
Use 'up and down'
spraying motion
Use 'side to side'
spraying motion
Adjust Spray Width
The spray width lever on the spray gun determines
the width of the spray pattern.
Spray width lever
Wide
pattern
narrow
pattern
For coating large surfaces
Use higher air power
Use higher material flow
For coating smaller areas,
corners and edges
Use lower air power
Use lower material flow
English
9