Matrix Calculations - Canon F-788DX Operation Manual

Matrix Calculations

Enter the matrix mode by pressing
indicator lights up.
Before you start matrix calculations, you have to create one
matrix or maximum three matrices which named A, B, and C at
one time.
The matrix calculation results are stored into MatAns memory
automatically. You can use the matrix MatAns memory for any
subsequent matrix calculations.
Matrix calculation may use up to two levels matrix stack; however,
squaring a matrix, cubing a matrix, or inverting a matrix only use
one stack.
Create a Matrix
1. Press
and then specify the dimension (number of rows and number of
columns) of the matrix. The dimension of matrix can be up to
3 x 3.
2. Next, input the value (element) of the matrix according to the
matrix element indictor display, following is a matrix element
indictor example:
Ma t A
3. Use the cursor keys to move, view or edit the matrix elements.
4. When finished the input, press
screen.
Edit Matrix Elements
1. To edit the element saved in the matrix memory, press
(Edit), then specify the matrix A, B or C for editing and the
corresponding matrix element indicator will be displayed.
2. Input the new value and press
3. When finished the input, press
screen.
(Dim) to specify the matrix name (A, B or C),
2 3
2 rows and 3 columns
to exit the matrix creation
to confirm the edit.
to exit the matrix editing
- 104 -
, and [MATX]