Vector Calculations - Canon F-788DX Operation Manual

Example: To determine the absolute value of the inverted Matrix C in
the previous example.
Operation

Vector Calculations

Enter the vector mode by pressing
indicator lights up.
Before you start vector calculations, you have to create one or
more vector which named A, B, or C (maximum three vectors at
one time).
The vector calculation results are stored into VctAns memory
automatically. You can use the vector VctAns memory for any
subsequent vector calculations.
Create a Vector
1. Press
and then specify the dimension of the vector.
2. Next, input the value (element) of the vector according to the
vector element indictor display, following is a vector element
indictor example:
Vector name
Element Value
3. Use the cursor keys to move, view or edit the vector elements.
4. When finished the input, press
screen.
Edit Vector Elements
1. To edit the element saved in the vector memory, press
(Edit), then specify the vector A, B or C for editing and the
corresponding vector element indicator will be displayed.
2. Input the new value and press
3. When finished the input, press
screen.
Display (Upper)
Abs MatAns
MatAns
MatAns
MatAns
MatAns
(Dim) to specify the vector name (A, B or C),
Dimensions of Vector
V ctA
1
- 108 -
Display (Lower)
11
12
21
22
Direction indicator, you
can view other elements
at next page.
0.
to exit the vector creation
to confirm the edit.
to exit the vector editing
0.
0.142857142
0.047619047
0.071428571
0.19047619
, and [VCTR]