7) Starting up the SurfTab for the first time
Charging the SurfTab
Our SurfTab tablets are generally delivered with the battery 70% charged.
Nonetheless, you should connect the SurfTab to a power socket before
starting it up for the first time.
To charge the SurfTab, connect the USB cable to the power adapter,
and use this to connect the SurfTab to a power socket.
The maximum battery life is reached after approximately ten charging cycles.
i
Switching on the SurfTab
Press the on/off switch for approximately 2-3 seconds to switch on the SurfTab.
A configuration assistant will appear. Follow the configuration assistant
instructions to set up your SurfTab.
During the setup process, the configuration assistant will prompt you to sign in
i
with your Microsoft account. If you do not yet have a Microsoft account, please
set one up at this point.
As soon as the device has been set up (and every time it is subsequently
switched on and booted up), the lock screen appears. Drag the lock screen
upwards with your fingertip to unlock the screen.
If your SurfTab is password protected, you must then enter the password.
i
EN
14