Table of Contents
Advertisement
3.6
User Account and Camera Setup on iPhone
What you need
• Smart Nursery Camera
• Power adapter for the Smart Nursery Camera
®
• iPhone
/ iPad
3.6.1
Download Hubble for Motorola Monitors App
• Go to App Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App and install it on your iPhone
®
iPad
.
3.6.2
Run Hubble App on your iPhone
• Ensure that your iPhone
• Run the "Hubble for Motorola Monitors" App, enter your account
information, read through the Terms of Service, and then select "I agree to
the Terms of Service" before you tap
NOTE
If you already have a Hubble App account, please select Already have an
Account? to login.
3.6.3
Add the Camera to your account
1. Tap
on the top right corner of the screen and select
2. Plug in and switch on the Camera. Wait for a couple of minutes for it to
warm up and the Camera LED starts to blink.
3. Tap Continue.
®
Your iOS
device will start to scan for the Camera in the Wi-Fi
4. Press and hold the
seconds. You will hear a beep tone, followed by a voice prompt indicating
that the Camera is ready for pairing.
5. Press the HOME button on your iOS
and select your Camera (CameraHD-xxxxxxxxx) from the list of Wi-
®
Fi
networks.
6. Return to Hubble app to resume setup.
7. Enter a name for your Camera (optional) and tap Continue.
8. Select your Wi-Fi
9. Enter your router password and tap Next.
14
®
with iOS version 7.0 and above
®
®
/iPad
PAIR
button on the underside of the Camera for 3
®
network and tap Continue.
®
/iPad
is connected to your Wi-Fi
Create
.
®
device, then go to Settings > Wi-Fi
Accessing the Smart Nursery Camera via your Mobile Devices
®
®
/iPad
®
®
Router.
Camera.
®
network.
®
/
Hide quick links:
Advertisement
Table of Contents
