User Account And Camera Setup On Iphone /Ipad; Power On And Connect The Camera; Download Hubble For Motorola Monitors App; Run Hubble For Motorola Monitors App On Iphone ® /Ipad - Motorola CN35 User Manual

5.4 User Account and Camera Setup on iPhone
What you need
®
• Wi-Fi Camera Unit
• Power adapter for the Camera
®
• iPhone / iPad
5.4.1

Power ON and Connect the Camera

• Connect the power adapter to a suitable electrical outlet and insert the plug
into the micro USB socket at the back of the Camera.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera's red LED flashes after the Camera has finished booting. When
you hear one beep, this means that the Camera is ready for setup.
5.4.2

Download Hubble for Motorola Monitors App

• Go to App Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App and install it on your iPhone
5.4.3 Run Hubble for Motorola Monitors App on iPhone
• Ensure that your iPhone
• Run the "Hubble for Motorola Monitors" App, select create an account and
enter account information. Read through the Terms of Service, and then
select "I agree to the Terms of Service" before you tap Create. (Picture i1)
NOTE
If you already have a Hubble App account, please select Already have an
Account? to go to the next step (Picture i1).
Wi-Fi® Internet Viewing
®
with iOS version 7.0 and above
® ®
/iPad is connected to your Wi-Fi
i1
® ®
/iPad
®
/iPad
®
/iPad
®
Router.
®
.
®
24