Cisco 2100 Series Configuration Manual page 42

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Versions after 7.4
10 Under the Security tab, at Layer 2 Security select the desired security policy from the
drop-down list.
Admin Tip: Use of Adapative Fast Transition.
The Adaptive setting for the FT (802.11r) mode cannot be used with the 3600-
Series AP's, but can be used with other AP's if supported in the WLAN Software
version.
11
○ For WPA2-PSK, under WPA+WPA2 Parameters:
i Select the WPA2-Policy check box.
ii Select the AES check box for WPA2-Encryption.
iii At Auth Key Mgmt select PSK from the drop-down list.
721-1001-000-AH.docx
December 2016 42