Cisco 2100 Series Configuration Manual page 13

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Note: The WLC will provision the APs
It is not necessary to configure each AP individually. The WLC is capable of provisioning
the APs.
11 From the main menu, click Controller.
12 Set the AP Multicast Mode to Multicast and enter a multicast IP address that is currently
not being used on your network for the Multicast Group Address.
13 Click the Apply button.
Cisco 7.0:
721-1001-000-AH.docx
December 2016 13