Pioneer SPH-DA100 Operation Manual page 36

Appradio
Hide thumbs Also See for SPH-DA100:
Table of Contents

Advertisement

Chapter
Customising preferences
08
Equaliser curve
S.Bass
(Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful
is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural
is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal
is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat
is a flat curve in which nothing is boosted.
Custom1
is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom
is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
audio sources.
❐ When "
Flat
" is selected, no supplement or
correction is made to the sound. This is use-
ful to check the effect of the equaliser
curves by switching alternatively between
"
Flat
" and a set equaliser curve.
1 Display the "Audio" screen.
➲ For details, refer to Customising the audio
settings on the previous page.
2 Tap [Graphic EQ].
3 Tap the equaliser curve you want.
36
Engb
Adjusting the 5-band graphic equaliser
You can adjust the level of each band for the
equaliser curves.
❐ A separate "
Custom1
ed for each source. If you make adjustments
when a curve other than "
lected, the equaliser curve settings will be
recorded in "
Custom1
❐ A "
Custom
" curve that is common for all
sources can be created. If you make adjust-
ments when the "
Custom
lected, the "
Custom
ed.
1 Display the "Audio" screen.
➲ For details, refer to Customising the audio
settings on the previous page.
2 Tap [Graphic EQ].
3 Tap one of the keys to select a curve
that you want to use as the basis of cus-
tomising.
4 Tap the frequency that you want to ad-
just the level for.
You can select the following frequencies:
100Hz
315Hz
1.5kHz
5 Tap the screen to adjust the level of the
equaliser band.
You can adjust the equaliser band level be-
tween "
+1dB
" and "
" curve can be creat-
Custom
" is se-
".
" curve is se-
" curve will be updat-
3.15kHz
8kHz
–1dB
".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents