Using The Radio Starting Procedure; Reading The Screen; Using The Touch Panel Keys - Pioneer SPH-DA100 Operation Manual

Using the radio
Starting procedure
1 Press the Home button to display the
Home screen.
2 Tap [Radio] on the Home screen.
➲ For details, refer to Home screen on page 10.
3 Use the touch panel keys on the screen
to control the radio.

Reading the screen



 Preset channel keys
➲ For details, refer to Storing the strongest
broadcast frequencies on the next page.
 Current broadcast information
The following information is displayed:
: Programme service (PS) name
•
PTY information
•
: Song title
•
: Artist name
•
 TRFC indicator
Shows the status of traffic announcements.
➲ For details, refer to Interruption icon sta-
tus on page 16.
 NEWS indicator
Shows the status of news programmes.
➲ For details, refer to Interruption icon sta-
tus on page 16.
 TEXT indicator
Shows when radio text is received.
 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
  


 Signal level indicator
Shows the signal strength of the selected
frequency.
 Frequency indicator
 Frequency scale
 Current time

Using the touch panel keys

  
 
Recalls the desired broadcast frequency.

Holding down the key stores the current
tuning frequency in memory.
➲ For details, refer to Recalling broadcast
frequencies on the next page.
Switches the band between FM1, FM2 and

FM3. Also switches to the FM band while
receiving the MW/LW band.
Switches to the MW/LW band while receiv-

ing the FM band.
Searches for an RDS station using PTY infor-

mation.
➲ For details, refer to Searching for an RDS
station using PTY information on page
15.
Raises frequencies in one-step increments.

Holds down the key and the tuner will scan
frequencies until a broadcast strong
enough for good reception is found.
Lowers frequencies in one-step increments.

Holds down the key and the tuner will scan
frequencies until a broadcast strong
enough for good reception is found.



  
Engb
Chapter
04
13