Compressor Repair - Graco TexSpray Compact HP Instructions-Parts List Manual

WARNING
HOT SURFACE HAZARD
Be sure the compressor duct work is
cool before removing it. If the sprayer
was operated recently, it will be very hot
and can cause burns!
NOTE: Clean the cooler whenever the compressor is
serviced.
1. Follow the Pressure Relief Procedure on page 2.
2. Fig. 1. Remove hopper (J).
20
7
23
35
26A
K
16
Fig. 18

Compressor Repair

26B
3. Fig. 18. Remove two screws (26A) and loosen two
screws (26B). Move pump (35) out of the way.
4. Remove filter cover (20).
5. Remove two screws (7).
6. Remove compressor cover (23) and air filter (K).
7. Remove compressor guard (16).
8. Remove grounding screw (36) and two leads (U)
from bottom of switch (9).
Continued on page 18.
9 6 7
36
U
18
308–718 17