Compressor And Motor Repair - Graco 310645H Repair And Parts Manual

Electric texture sprayer for water-based materials only maximum working air pressure: 45 psi (3.1 bar) maximum working fluid pressure: 100 psi (6.9 bar)

Hide thumbs

Table Of Contents

Table of Contents

For 120 V sprayer use Compressor and Motor

Replacement Kit, 287315.

For 230 V sprayer use Compressor and Motor

Replacement Kit, 287344.

Kits include motor/compressor and mounting hardware.

Disassembly

First read and follow instructions in the Before

performing any service on sprayer section, page 9.

Then remove hopper, front and back covers, page 9.

Remove hose extension and RotoFlex HD Pump

assembly from frame, page 11.

1 Remove two screws and

access cover on the left

side of the motor.

2 Remove ground nut and

disconnect green ground

wire.

3 Disconnect black and white

wires to motor.