Native Instruments MASCHINE Manual page 573

Element
Impact
Width
STRIKE Section
Edge
Bell
Advanced Page
Element
HYBRID Section
Character
Tail
Modulation Page
Like with all other engines and Drumsynths, the
locity.
Description
Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
70.0%).
Adjusts the perceived stereo image, measured as a percentage. At
zero the sound is mono, at 100.0% the sound is a wide stereo
image, replicating the effect of recording with overhead stereo
microphones. Available values range from 0.0 to 100.0% (default:
50.0%).
Adjusts the point where the cymbal is hit, measured as a
percentage. Hitting the edge of the cymbal (100%) creates a more
chaotic sound, hitting it near the center (0.0%) creates a more
high-pitched sound. Available values range from 0.0 to 100.0%
(default: 50.0%)
Adjusts the high-frequencies on a narrow band, measured as a
percentage. (default: 0.0%)
Description
Adjusts a wider range of timbers between more noisy to more
metallic ones, measured as a percentage. Available values range
from 0.0 to 100.0% (default: 20.0%).
Adjusts the length of the sound tail through an envelope. Available
values range from 0.0 to 100.0% (default: 100.0%).
Modulation page contains one parameter:
Using the Drumsynths
The Cymbals
Ve-
MASCHINE - Manual - 573