Native Instruments MASCHINE Manual page 120

Hide thumbs Also See for MASCHINE:

Table of Contents

▪ Now imagine that you have loaded an acoustic shaker Sample and want to find a Sample

for another drum instrument, e.g., a tom: You leave the

filter and directly go to the second level, where you select

Shaker. As you select Tom, the whole set of Sub-Types underneath (third level) will be re-

placed with the Sub-Types of the

lection will be retained: In our example, both the

tag below them; since you had selected the

tag below the

This allows you to quickly find various Samples (even for different instruments) with similar

characteristics — here, an acoustic sound.

Tags for Instrument and Effect Presets: 2 Type Levels and 1 Mode Level

For Instrument and Effect presets, tags can be of two kinds: Type or Mode. You can select

them via the

filter works as described above for all other file types, except that only two hier-

archical levels are available. See above for a detailed description.

filter provides an additional level that is independent from the Type levels:

◦ In general, Mode tags will rather refer to technical terms (e.g., Arpeggiated,

sive, Synthetic, etc.).

filter is always displayed. You can start your search with the

before (or even without) using the

◦ However, the list of tags available in the

selected in the

have selected, the Type tags will prevail and the Mode tags will be deselected.

tag. However, insofar as possible your previous se-

tag will be automatically selected as well.

filter, respectively:

filter. If no file contains both the Type and Mode tags that you

Searching and Loading Files from the Library

tag selected at the top level

tag below the

filter will vary depending on the tags

tags have an

MASCHINE - Manual - 120