Edit Numbers For Remote Calls; Set Time Delay For Remote Calls - VTech VC7151-102A User Manual

Edit numbers for remote calls

You can add, edit, or delete a telephone number for remote
calls.
1. Press MODE on the handset or telephone base when idle.
2. Press or on the handset, or CALLS / or
PHONEBOOK /
on the telephone base to scroll to choose Remote, and
then press OPTIONS.
SELECT
3. Press
on the handset, or CALLS / or PHONEBOOK /
4. Press or
on the telephone base to scroll to the desired slots (1, 2, or 3), and then press
SELECT.
5. Use the dialing keys to enter the number.
SAVE
6. Press to save.

Set time delay for remote calls

You can choose to set an exit or entrance delay time for the
remote calls, so that when a sensor is triggered when you
exit or enter your home within the delay time, you will not
receive the unnecessary remote call.
For example, when you are about to leave home, you can set
the exit delay time to 5 minutes. Once the delay is set, you
will not receive a remote call even when you open the door
within those five minutes.
As for the entrance delay time, if you set it to 1 minute, you
will receive the remote call a minute after opening the door as you come home,
unless you press
handset or telephone base within that minute.
If you want to be notified immediately whenever a door is opened, we recommend
you to set it as 0 minutes.
to select Set tel number.
MODE and then choose Local mode, or press DISARM on the
32