Section 4 View Screens; Introduction; Main Screen; View Screens - Kohler MPAC 1500 Manual

4.1

Introduction

This section illustrates the view screens. Use the view
screens to check system settings, event history, and
maintenance records.
navigate through the view screens.
For detailed instructions
password-protected setup and test screens, see
Section 5.
Some parameters will appear only under certain
conditions. For example:
D
The Daylight Saving Time settings are displayed only
if DST is enabled.
D
Phase rotation and in-phase monitoring are
displayed only for three-phase systems.
D
Some parameters and time delays appear only for
programmed-transition models.
4.2

Main Screen

The main screen appears at system startup.
Figure 4-1.
Press the View button to navigate to the View screens
shown in the following sections.
The display returns to the main screen after 30 minutes
of no activity (no buttons pressed).
System Ready
LD Exer 12/14 @ 16:00
Norm 480V Emer 480V
B
View
Figure 4-1 Main Screen
TP-6714 4/10
No password is required to
for using
Set Test

Section 4 View Screens

4.3

View Screens

From the main screen, press the View button to step to
the first view screen, View Event History.
In the View screens, press the down arrow
step to the next view screen. Press the right arrow (
the button to view details.
System Ready
LD Exer ##/## @ ##:##
Norm ###V Emer ###V
B
View
View
Event History
B Y
View
Maintenance Records
B Y
View
Exerciser Setup
See
B Y
View
Prime Power Setup
B Y
View
System Setup
B Y
View
Source Setup
B Y
6446
View
Source1 Time Delays
B Y
Main Screen. Press
the View button to step
to the first View screen.
Set Test
"
Main
"
Main
Source2 Time Delays
B Y
"
Main
Inputs/Outputs
B Y
"
Main
Common Alarm
" B Y
Main
Communications Setup
B Y
"
Main
Control Parameters
B Y
"
Main
Section 4 View Screens
) button to
(B
"
)
View
"
Main
View
"
Main
View
"
Main
View
"
Main
View
"
Main
45