NETGEAR D6220 User Manual page 48

AC1200 WiFi VDSL/ADSL Modem Router Model D6220
The following figure shows the settings that display when you configure an ADSL connection with a
login and PPPoE service.
12. Enter the ADSL settings as described in the following table.
Field
Multiplexing Method
VPI
Description
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The multiplexing method can be either virtual circuit (VC) based or logical link control
(LLC) based.
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting, which depends
on the selected ISP. The VPI might be required not only for a VC-based connection but
also for an LLC-based connection.
Manage the Internet Settings Manually
48