Battery Installation And Charging - UPRtek MK350N PLUS User Manual And Warranty

2.1

Battery Installation and Charging

Battery installation：
Step1. Hold MK350N PLUS , then press the battery cover.
Step2. Press the battery cover down to remove it.
Step3. Install the battery after removing battery cover.
1
2
※ Press the battery cover down then you can remove the
cover smoothly from MK350N PLUS.
1. Please charge the battery for 6 hours at first time usage.
2. To avoid any interruption while measuring, please check
battery status before use.
3. Please purchase a new battery if it gets low easily after
being fully charged, which means battery life comes to an
end.
4. Usage time will depends on battery life, MK350N PLUS
battery can operate 5 hours after being fully charged.
3
- 8 -
2.1
Battery Installation and Charging
Battery charging：
1. Plug power charging cable into power jack to start
charging.
2. Power Off Status: Users can check power key, it will
light in red while charging and light off after being
fully charged.
3. Power On Status: Users can check MK350N PLUS
screen, it will appear a lightning symbol to indicate
charging, and lightning symbol will disappear after
being fully charged.
1
※ The power key will light up in red,
2
and light off after fully charged.
3
※ Battery capacity status while charging.
※ Lightning symbol will appear
when charging and disappear
after being fully charged.
- 9 -