Appendix F. Software Installation - Promag TR515 User Manual

Appendix F. Software Installation

Please install DISK5151 Software before using TR515 series. DISK5151 includes 「 DS
Manager」 and 「TR515 Application Program」. Setting procedure is as follows.
1. Ethernet Interface TR515 :
Hub to TR515E (using cable WAS-1499)
1. Open the program DS Manager. It will automatically detect the IP Address of the TR515
on line.
(The default IP address is 127.0.0.1. For DS Manager cannot detect the IP address in use
currently on the LAN, please make sure the IP address you set is not in use to avoid
duplication.)
2. Click [Change IP] to change the IP address to be used by TR515, and then click [OK].
P.S. The IP address must not be the existing one.
TR515 User's Manual
29