Promag TR515 User Manual page 13

Set new machine number ('I', 49H)
Command INN
Reply A
NN- machine number in Hex form (00H-FFH), 00 should never be used on a
multi-terminal network because this is a universal number (see D-command
description for details).
This command is used to assign a new machine number to the terminal.
Machine numbers provide a way to distinguish between the terminals on a
multi-terminal network. See D-command description for more details.
Get machine number ('Y', 59H)
Command Y
Reply ANN
NN- machine number in Hex form (00H-FFH)
This command is used to retrieve the terminal's machine number. Machine
numbers provide a way to distinguish between the terminals on a multi-terminal
network. See D-command description for more details.
Set date/time ('S', 53H)
Command SYYYYMMDDhhmmss
Reply A
YYYY-year, MM- month, DD-date, hh-hour, mm-minutes, ss- seconds
This command is used to set the TR515's internal clock. Date/time supplied
must be valid. Incorrect data (like 31
TR515 User's Manual
st
of February) will be rejected (error 04).
11
Possible error codes: 04, 07
Possible error codes: 07
Possible error codes: 04, 07