Specifications; Ec Declaration Of Conformity - Makita BVR340 Instruction Manual

ENGLISH
1-1. Recessed part in the battery
cartridge cover
1-2. Battery cartridge cover

SPECIFICATIONS

Vibrations per minute (min
Vibration amplitude
Vibration head (diameter x length)
Flexible shaft assembly length
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Do not use the tool in the rain.
･
Do not clean the tool with water.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for removing bubbles from concrete
when casting concrete.
For Model BVR340
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 72 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
Explanation of general view
2-1. Red part
2-2. Button
2-3. Battery cartridge
Model
-1
)
Overall length
Net weight
Rated voltage
equipment and
environmentally compatible
2
.
BVR340
12,500
800 mm
1,083 mm
3.1 kg
D.C. 14.4 V
END003-1
These values have been obtained according to
EN60745.
For Model BVR350
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 74 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is 3 m/s
These values have been obtained according to
EN60745.
its
For Model BVR440, BVR450, BVR850
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
ENE055-1
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
ENG003-2
For Model
BVR340,BVR350,BVR440,BVR450,BVR850
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
3
2-4. Cover
3-1. Switch lever
BVR440 BVR350
12,500 13,000
1.0 mm
25 mm x 221 mm
1,200 mm 800 mm
1,483 mm 1,083 mm
3.6 kg 3.2 kg
Wear ear protection.
2
.
Wear ear protection.
2
.
BVR450 BVR850
13,000 12,500
1,200 mm 2,400 mm
1,483 mm 2,683 mm
3.7 kg 5.3 kg
D.C. 18V
ENG004-2
ENG001-2
ENH102-5