Timer Receiving - Furuno FAX-30 Operator's Manual

3. FAX OPERATION: PC
3.2

Timer Receiving

Most facsimile stations transmit facsimile signals in accordance with a schedule
issued by relative meteorological observatory. (You can find facsimile schedules
in the publication "Meteorological Facsimile Broadcasts," available through
meteorological observatory bodies.) If you wish to receive a certain facsimile
broadcast on a daily basis, therefore, the timer receiving mode will virtually allow
you "hands-off" automatic operation. 30 timer programs may be set.
3.2.1 Setting, changing timer receiving schedule
1. At the facsimile standby display, click TIMER SETUP followed by PROGRAM
LIST to show the timer schedule.
2. Click the location in the center column of the timer program list corresponding
to the timer program no. you want to set. For example, click the center
column of No.2. The following timer program menu appears.
3-2
Timer program list
TIMER PROGRAM No.2
< back
ZONE
1: NORTHWEST PACIFIC
STATION
0: JMH/TOKYO 1
CHANNEL
AUTO
IOC AUTO
SPEED AUTO
START TIME
00
END TIME
00
FREQUENCY
00000.0
START TIME ON
OK ERASE
Timer program menu
00
00
kHz
OFF