Choosing The Receive Mode - Furuno FAX-30 Operator's Manual

1. OVERVIEW, SETUP
The standby display is where you begin all facsimile and navtex operations. If a
facsimile image has been received, the latest facsimile image is displayed.
1.1.4

Choosing the receive mode

The FAX-30 has three modes: facsimile only, navtex only, and facsimile (timer) &
navtex. Choose desired mode as follows:
1. At the facsimile standby display, press the MODE SETUP soft key.
2. Press the RX MODE soft key.
3. Rotate the [ENTER] knob to choose receive mode desired and press the
ENTER soft key.
1-4
Facsimile image area
(Facsimile image area)
Receive mode setup screen
RX MODE
▲
▼
FAX-30
WX FAX
NAVTEX
MODE
SETUP
Standby display
WX FAX
NAVTEX
FAX (TIMER) & NAV
RX mode options
Soft keys
MODE
SETUP
RX
MODE
RX
NOTICE
RETURN