Bissell 1858 series User Manual page 16

Maintenance: Cleaning the Nozzle
1
If pet hair or debris
become clogged in
the nozzle, it can
be cleaned out of
the nozzle with the
nozzle clean out tool.
Turn off and unplug
the machine from
the earthed outlet.
3
Hold the nozzle and insert the nozzle clean
out tool into the thin slot on the bottom of
the nozzle that touches the floor. Move the
nozzle clean out tool up and down, back
and forth to clean.
Maintenance:
1
Turn off and unplug
the machine from the
earthed outlet.
16
www.BISSELL.com
2
Remove the nozzle from the foot by
flipping the accessory hose door open,
then lifting the accessory hose door and
nozzle up and away from the foot.
4
Return the nozzle back
onto the foot of the
machine by lining up the
three hooks on the
nozzle to the bottom of
the foot (see arrows for location).
Rotate the nozzle up and click into place.
Close the accessory hose door.
Cleaning the Brush Rolls
2
Lay the machine down
on its back or side.
3
Use the comb to brush
out the debris or hair from
the brush rolls.