Bissell 1858 series User Manual page 12

Cleaning with the Bare Floor Tool
1
Turn off and unplug your machine.
Attach the bare floor tool to the
foot's bottom by lining the tool
to the edge of the nozzle. Rotate
down until it clicks into place.
Follow filling instructions on page
8 using the Wash & Shine Hard
Floor Cleaner formula and switch
cleaning mode to Express Clean.
WARNING
WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the
BISSELL Bare Floor Tool must be used, and is only to be used with BISSELL Wash & Shine
Hard Floor Cleaner formula intended for use with this appliance.
12
www.BISSELL.com
(select models only)
2
Plug into a properly
earthed outlet and turn
the machine on. Clean by
pressing the spray trigger
for 1 wet pass forward, 1
wet pass back, and then
release the spray trigger
and make 1 dry pass
forward, 1 dry pass back.
3
When finished,
unplug the machine
and remove the
bare floor tool by
rotating the tool up
to unhook from the
nozzle. Rinse and let
dry before storing.