Bissell 1858 series User Manual page 15

Maintenance: Cleaning Machine After Use
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
1
First, fill the clean water
tank with warm tap water
and then empty it all to
rinse. Then fill again with
warm tap water and return
the tank to the machine.
Twist cap back on tightly.
To flush and rinse machine:
Turn the machine on and
press the spray trigger for
15 seconds while making
back and forth passes on a
section of carpet. Release
the spray trigger and suck
up the water.
See page 13 to clean the
water that was just sucked
up from the dirty tank.
Empty the clean water tank
and let dry before storing.
Wipe your machine's
exterior with a soft cloth.
www.BISSELL.com
15