Spares may be obtained from your moving parts of the appliance and its BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard accessories.
Thanks for buying a BISSELL deep cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your deep cleaner works as well in six years as it does today, so this guide has tips on using (pages 7-12), maintaining (pages 12-14), and if there is a problem, troubleshooting (page 15).
Page 4
Belt/Brush Access Plate EdgeSweep™ Brushes (3.7 Litre Capacity) Power Button Carry Handle Float Stack Rubber Tab Dirty Water Tank (on Dirty Water Tank) Belt Access Door Quick Release for Foot Wrapped Cord Spray Trigger Recline Pedal 10 In-Use Cord Clip www.BISSELL.com...
Using a Phillips screwdriver, Wrap the cord around clean water tank with secure the carry handle with the carry handle and quick the grooves and slide the screw that’s taped to the release hook. the tank into place. upper handle. www.BISSELL.com...
Protector Protector Technology ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *60 mL of 2X concentrated formula is equivalent to 120 mL of non-concentrated formula. Tips Before Carpet Cleaning •...
Page 7
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Wash & Remove + Antibacterial formula: Only fill your clean water tank with the recommended amount of water and formula to achieve anti-bacterial benefits.
Page 8
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other household cleaning products.
1 hour of dry time. Press the power button to turn the machine on. *Choose “Deep To recline your machine Clean” mode and use BISSELL for use, press the recline Plug into a properly Wash & Remove + Antibacterial to pedal with your foot.
Page 10
NOTE: If using a Deep Reach Tool (select models only), be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibres. NOTE: Regularly clean high-traffic area rugs in Express Clean mode to remove the forgotten dirt. www.BISSELL.com...
WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL Bare Floor Tool must be used, and is only to be used with BISSELL Wash & Shine Hard Floor Cleaner formula intended for use with this appliance.
Page 12
Release Wipe your machine’s the spray trigger and suck exterior with a soft cloth. up the water. Twist cap back on tightly. www.BISSELL.com...
Maintenance: Cleaning the Brush Rolls Lay the machine down Use the comb to brush Turn off and unplug the machine from the on its back or side. out the debris or hair from earthed outlet. the brush rolls. www.BISSELL.com...
Page 14
NOTE: Force must be used to lift the belt access door. There is a small belt and end cap on the other end of the brush rolls. That belt needs to wrap around the tooth end of the brush rolls and the end cap needs to be secure before re-assembling the machine. www.BISSELL.com...
To be sure to avoid staining, place wax paper or aluminum foil under the legs. Wait at least For more helpful tips another three hours before removing wax and videos, check out paper or foil. BISSELL.com www.BISSELL.com...
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, LIABLE FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE BISSELL will for six years from the date of purchase by the OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY original purchaser repair or replace (with new or remanufactured NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT INCLUDING components or products), at BISSELL’s option, free of charge, any...
Need help?
Do you have a question about the PROHEAT 2X REVOLUTION 1858 SERIES and is the answer not in the manual?
Questions and answers