Generator Set Adjustment; Generator Adjustment; Voltage Regulator Adjustments; C.basic Engine Adjustments - Hobart 60PL20 Operation And Maintenance Manual

27. Automatic voltage control potentiometer (R5)
28. Cable size compensation rheostat
29. Line-drop compensation on/off switch

3. Generator Set Adjustment

A. Generator Adjustment
The 400-Hz generator is a brushless type requiring no adjustments of any kind.
B. Voltage Regulator Adjustments
At some time during the life of the equipment, the solid stage voltage regulator may require output volt-
age adjustments and/or line-drop compensation adjustments. Make these adjustments according to
the instructions given in Solid State Regulator Manual OM-2020, which is a part of Chapter 6 of this
manual.

C.Basic Engine Adjustments

Adjustment procedures applicable to the diesel engine are included in the Perkins Diesel Handbook
which accompanies this Hobart manual. Specific information for this particular engine is listed in Fig-
ure 2.
December 31/91 Revised
Operating Controls and Instruments
Figure 1 (Sheet 2 of 2)
30. Cable length compensation rheostat
31. Voltage regulator fuse (5A)
OM-2053
2-3
Page 7