Electrical System (12-V Dc); Lights; Fuses - Hobart 60PL20 Operation And Maintenance Manual

OM-2053
Daily Or Every 8 Hours
Inspect air cleaner
Check output cable and connector
Check generator voltmeter
Check fuel quantity
Weekly, Or Every 50 Hours
Check crankcase oil level
Check coolant level
Monthly, Or Every 200 Hours
Check safety switches
Change engine oil filter element
BI-MONTHLY, OR EVERY 400 HOURS
Check cooling system hoses,
tubes, fittings, clamps
Every 6 Months Or 1200 Hours
Check V-belt tension
Change fuel filter elements
Inspect all wiring and connections
Open Fuel Tank Drain Every 500 Hours
Lubricate (see Lubrication Chart)

3. Electrical System (12-V DC)

A. Lights
Check all lights for proper operation DAILY. Replace any defective lamps (bulbs) as soon as discov-
ered. Figure 2 lists ALL lamps, their location, and part numbers.
B. Fuses
Check and replace fuses as required. See Figure 3 for fuse sizes and locations. Figure 3 includes all
fuses used in both the engine and generator electrical system.
2-2
Page 2
Inspection/Check/Maintenance Schedule
Figure 1
Check generator ammeter
Check frequency meter
Check all lights
Check all lights
Clean battery terminals
Change engine oil
Check exhaust sys.
Check protective relays
Clean and inspect generally
Drain/refill cooling system
December 31/91 Revised