Evacuation - Lippe Lift LL12 Operation Manual

4.7.2 Evacuation / only by technical personnel
Proceed as follows in order to help the operator out of the lift:
 Press the EMERGENCY STOP button (p.7, item 3) on the platform.
 Remove the plug seal (for the emergency unlocking) on the front cladding
on the uphill side using a screwdriver or similar.
 Press the lever shown in the picture (below right) downwards using a
suitable tool.
 The operator can now be helped out at the uphill side.
The platform must be folded up by hand so that the lift does not block the staircase
(see 4.5.2).
Operating manual LL12 15/18 Version 1.6 (01/2017)