Table of Contents
Advertisement
4.6
Travelling with the platform lift (standard version)
Before each journey, make sure that the warning signal works. The following control
elements are located on the platform:
a) Key switch
b) Control unit
c) Pushbutton
After driving the platform, insert the key and turn it to position -I-:
! In the case of the LL12 platform, the safety barrier closes electrically when the
button is pressed and held in the desired direction of travel. The platform lift
begins to move once the barrier has closed.
Upon reaching the destination station:
! The platform lift stops automatically (the respective position is set during the
installation).
! In the case of the platform, press and hold the button until the safety barrier has
opened.
Travelling with the platform lift (special version 1) [via the external control unit,
with 3-position key switch (p.7, item 2) for a trip with the platform open via the
external control unit]. This option must be activated by a specialist inside the
controller. It must be ensured that no third person can suddenly get/jump into the
path of the lift. Condition: driving area is 100% in view !!!!
The key switch (p.7, item 2) is to be placed in position -II-, otherwise the procedure
is the same as described under 'standard version', with the difference that only the
external control unit is used here.
Travelling with the platform lift (special version 2)
The key switch (p.7, item 2) is to be placed in position -I-, otherwise the procedure is
the same as described under 'standard version'.
4.7
What to do in the event of an unexpected standstill, e.g. due to a power failure?
We recommend that a working mobile telephone be carried in order to alert the
rescue services.
4.7.1
Manual operation / operation with hand wheel
The LL12 stair lift can also be operated manually. Manual operation must be
performed by technical personnel! The procedure is as follows:
a) Press the EMERGENCY STOP button (p.7, item 3) on the platform.
b) The bolted connection of the platform hood must be remove using the
hexagonal wrench (provided in the envelope).
Operating manual LL12
Function -I- and -0- (p.7, item 2)
Function UP and DOWN (p.7, item 1)
EMERGENCY STOP (red knob) (p.7,item3)
13/18
Version 1.6
(01/2017)
Advertisement
Table of Contents
