Advertisement
Basic DOC·IT Functions
Printing
See Chapter 5 in your User's Guide for addi-
tional information on printing.
Here is a summary of compatible printer
drivers which can be substituted for the
DOC·IT drivers.
DOC·IT
Compatible Driver
™
TrueImage
35 Apple® LaserWriter®
II NTX,
™
PostScript
Compatible
driver
TrueImage 13
Apple LaserWriter II, or
ible driver
PCL5
HP® LaserJet® III, or
HP Compatible driver
PCL4.5
HP LaserJet IIP, or
HP Compatible driver
To print from Windows
application:
1. Click
, then select
File
2. Make sure a DOC·IT driver is selected
(e.g., DOC-IT HP III Comp. on OKIPORT).
3. Click
if you wish to set paper source,
Setup
paper size, or orientation, then click
4. Click
. Your application will begin
OK
processing the document to be printed.
Note: If you're using a DOC·IT driver
on OkiPort, a dialog box will pop
up asking you to select
Only, Fax Only,
To print from DOS application:
or
PostScript Compat-
.
Print
.
OK
Print
or
.
Print And Fax
1. Exit Windows and go to DOS prompt.
Make sure you're in the main DOC·IT
directory (default is c:\docit).
2. Type config, then press Enter key.
3. Select ``Display DOC·IT Settings''.
4. Record driver and port # for the LPT port
you're using.
Note: If you wish to change the LPT
assignments for your emulations,
select "Set Print Emulations".
5. Press Esc key, then exit to DOS.
6. Enter your DOS application.
7. Refer to your software documentation for
instructions on how to engage a printer
driver and port, and select the appropriate
compatible driver shown in the table above
To eliminate "DOC-IT Print"
pop-up box when printing from
Windows application:
1. Exit Windows™ and go to DOS prompt.
Make sure you're in the main DOC·IT
directory (default is c:\docit).
2. Type config, then press Enter key.
3. Select ``Display DOC·IT Settings''.
4. Record driver and port # for the LPT port
you're using.
5. Press Esc key, then exit to DOS.
6. Engage Windows and double-click
Windows Control Panel icon.
7. Double-click Printers icon.
8. Select driver you recorded in step 4
above, and click
Connect
9. Select port recorded in step 4: click
10. With new printer highlighted, click
.
Default Printer
11. Click
to exit dialog box, then close
Close
Windows Control Panel.
Note: Alternately, select a compatible
driver from table above, then con-
.
.
OK
Set As
9
Advertisement
