Advertisement
To print to LPT1:
To print to LPT1, you must redirect it to
DOC·IT LPT2 or LPT3, using either the
DOC·IT Configuration program or the
DCTLOAD program.
The DOC·IT Configuration Program
This will change your AUTOEXEC.BAT and
continue to redirect LPT1 even if you reboot.
1. If you're in Windows, exit. Then go to DOS
prompt, and make sure you're in the main
DOC·IT directory (default is c:\docit).
2. Type config, then press Enter key.
3. Select "Set Print Emulations".
4. Select LPT1.
5. Select "Redirect to LPT2" or "Redirect to
LPT3", as desired.
6. Select "Return to Main Menu".
7. Save changes and exit to DOS.
The DCTLOAD Program
This allows you to redirect LPT1 from within
a DOS application using the hot-key combina-
tion [Left] Ctrl-[Left] Alt-D, until you reboot.
1. If you're in Windows, exit. Then go to DOS
prompt, and make sure you're in the main
DOC·IT directory (default is c:\docit).
2. Type dctload, then press Enter key.
3. Enter your DOS application.
4. Press [Left] Ctrl-[Left] Alt-D (hot key
combination).
5. Select "1" from the DOC-IT DOS UTILITY
screen.
6. Choose LPT2 or LPT3 from the Select LPT1
Re-Direction screen.
7. Press Enter key.
8. Press ESC key to exit back out to you DOS
application
10
To enable Print Screen:
To enable print screen, you must redirect
LPT1 to a DOC·IT port with an HP driver:
PCL4+ (HP LaserJet IIP) or PCL5 (HP LaserJet
III), using one of the programs described at
left. Then, to print screen:
1. Press
key on your keyboard.
Print Screen
2. Using DOC·IT front panel, press
then
, then
ENTER
START
Faxing
See Chapter 7 in your User's Guide for addi-
tional information on sending faxes.
To send Fax from a Windows
application:
1. Click
, then choose
File
2. Select a Windows DOC·IT driver on
OkiPort, then click
3. From ``DOC·IT Print'' dialog box, select
or
Fax Only
Print And Fax
4. Enter information in ``DOC·IT Fax From
Application''. Then enter fax number:
a. Tab down to
Recipient FAX Number
and type in number manually. OR
b. Click
Phone Book
PUBLIC Phone Book onto screen.
Click a number to select it. OR
c. Click
: select your
User
your password, click
, select "Use Private Phone Book"
Book
and click
to bring list of numbers
OK
onto screen. Click a number to select it.
5. Optional: click
Settings
data speed, etc., then click
6. Click
.
Send
STOP,
.
from menu.
Print
.
OK
, then click
.
OK
box
, then click
to call
OK
, enter
User ID
. Click
OK
Phone
to select resolution,
.
OK
Advertisement
