Advertisement
DOC·IT Setup and Configuration Checklist
Before you begin using your DOC·IT System, please take a few minutes to go through the
following checklist to set up and configure your system:
Set up Fax System Settings
1. Click DOC·IT icon in Doc-It program group to engage DOC·IT Manager.
2. Click
Admin
3. Click
OK
4. Click
Set Station
your identification to the top of outgoing faxes as required by the FCC.
5. Click
.
OK
6. Locate
Rings Prior to Answer
desired value from 1 to 8 rings (suggest change to 1 ring for dedicated fax line).
7. Check screen for any other global settings you wish to change.
8. Click
.
OK
Set up Print System Settings for Receiving Legal-Size Faxes
(a) If you have the optional legal tray installed in the optional second paper tray,
select Smart: DOC·IT will automatically switch to legal-size tray
(b) If you don't have optional legal-size tray, set Vertical Shrink to 140%: DOC·IT
will automatically shrink legal-size faxes to fit on 11" paper.
1. While in DOC·IT Manager, click
2. Click
.
OK
3. (a) Click
(b) Or, Click
4. Click
.
OK
Complete the Electronic Warranty Registration
To be informed of upgrades and enhancements for your DOC·IT system, complete
the Electronic Warranty Registration: double click Registration icon in Windows
DOC·IT group, then click "Register Your DOC-IT System" to start the process.
Configure to Print from DOS
If you'll be printing to DOC·IT from DOS applications, see "To print from DOS
application" on page 9 of this booklet.
OKIDATA, 532 Fellowship Road, Mt. Laurel, NJ 08054
OKIDATA and DOC·IT are registered trademarks of OKI Electric Industry Co., Ltd. OKIDATA marque déposée de OKI Electric Industry Co., Ltd.;
marca registrada OKI Electric Industry Co., Ltd. Apple and LaserWriter are registered trademarks of Apple Computer, Inc. HP and LaserJet are
registered trademarks of Hewlett-Packard Company. PostScript is a trademark of Adobe Systems Incorporated, which may be registered in certain
jurisdictions. TrueImage and Windows are trademarks of Microsoft Corporation.
© 1994 by OKIDATA
in menu, then select
(Note: Factory default is no password for Admin Login).
button and type in the information in the boxes. This will add
(½-way down), and click
in
Smart
Fax Print To Tray
spin button to set
Fax System Settings...
in menu and select
Admin
box
to 140%.
Vertical Shrink
TEL: (609) 231-1375
.
or
to change setting to
Print System Settings
FAX: 609-233-8630
59265401
.
Advertisement
