Omron V740-BA50C22A-US Operation Manual page 38

2. Kill
The UPDATE command is also used to initialize
a tag. 3 parameters must be specified in SET
Clause. The first is 'killed' flag, the second is
password for the tag and the last is id of the tag.
The structure of an UPDATE command is the
same as ID Write.
•
Example : To lock tag id of a 64-bit EPC tag:
UPDATE tag_id SET killed=1,
password=0x88, id=0x1234567890ABCDEF
WHERE protocol='EPC1' AND antenna_id=1;
The reader returns the tag_id if the kill operation
was successful. For example the response is as
follows:
||0x00000000000000000000<LF><LF>
If succeeded, the response of kill command is all
0.
If the operation is failed, "Error 0102: Error
performing query<LF><LF>" returned.
Table5 : Table Schema - Kill Tag
Keyword Entry
UPDATE tag_id
SET killed
password
id
WHERE antenna_id
protocol_id
V740 RFID READER/WRITER, ANTENNA
OPERATION MANUAL
Table Arguments
- -
tag_id Int
tag_id Hex Streing
tag_id Hex String
tag_id Int
tag_id String
38 of 56
•
Example : To lock tag id of a 96-bit EPC tag:
UPDATE tag_id SET killed=1,password=0x88,
id=0x1234567890ABCDEF12345678 WHERE
protocol='EPC1' AND antenna_id=1;
The reader returns the tag_id the same way as 64-
bit tag.
Note: The format of the tag data in the command
must much the selected protocol or an error will
result. (See section 1.6)
For example :
- A 64 bit EPC1 tag requires 16 hexadecimal digits
- A 96 bit EPC1 tag requires 24 hexadecimal digits
Note: You must send this command to only one tag
at one time in the stable communication area.
Note: Response data always contains 2 separators
in front of the tag ID.
Note: After sending this command, you must send
an ID read command and confirm no ID data is sent
as a response.
Range Example
- -
1 1
[0x00...0xFF] 0x88
- 0xFEDC
BA09876
54321
[1...4] 1
'EPC1' 'EPC1'
Comments
Value
Tag id database
table (Fixed)
Can be specified
with only
(Fixed).
Specifies
password set to the
tag in advance.
Specifies the tag id
to be updated
Specifies
antenna used
update a tag
Specifies
protocol used
update a tag.
Must be uppercase.
2005-09, REV0.1
©OMRON CORPORATION 2005
"1"
the
the
to
the
to