Omron V740-BA50C22A-US Operation Manual page 20

Network Settings: All Interfaces
Static network settings are ignored when in DHCP mode, and DHCP related settings are ignored when in static
IP mode. Please note that your network needs to have properly configured DNS servers if you wish to connect
to the reader via its hostname. Usually when using DHCP, the DHCP server will add the hostname to the DNS
server's database.
Item
Turning on automatic hostname will append the last six
numbers (3 bytes) of the reader's MAC address to the text
Automatic
in the hostname field.
Hostname
With the unique hostname, avoid the same hostname
existing in the network, which may occur while some
readers are operating simultaneously in DHCP mode.
Hostname
Specify a name that is unique on the network for the
reader.
NTP Server
Specify the IP address (or machine name) of the server to
get current time from the network (either LAN or WAN). The
reader obtains the correct time from another device since it
doesn't have a hardware clock.
Example) 129.6.15.8(NIST, Gaithersburg, Maryland)
Domain Name
Specify the group name when using devices on the network
as a group. Omit unless using devices as a group.
Primary
Specify the IP address (or machine name) of the server
that replaces a domain name with an IP address on the
DNS Server
network. It is used first, the secondary DNS server is used
next. Omit if you access by the static IP address.
Secondary
Specify the IP address (or machine name) of the server
that replaces a domain name with an ID address. The
DNS Server
server is used only when the primary DNS server can not
find the domain name. Omit if you access by the static IP
address.
Default Gateway
Select whether the reader uses LAN wired or air interface.
V740 RFID READER/WRITER, ANTENNA
OPERATION MANUAL
Describe
20 of 56
Setting Default
Requirement
Optional No
Mandatory v740
Optional (none)
Optional (none)
Optional 10.0.0.1
Optional (none)
- LAN(fixed)
©OMRON CORPORATION 2005
2005-09, REV0.1