Battery Replacement - Craftsman 73756 Owner's Manual

BATTERY REPLACEMENT

WARNING: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery cover.
1. When the battery becomes exhausted or drops below the
operating voltage, "
LCD display. The battery should be replaced.
2. Follow instructions for installing batteries. See the Battery
Installation section of this manual.
3. Dispose of the old battery properly.
WARNING: To avoid electric shock, do not operate your meter
until the battery cover is in place and fastened securely.
NOTE: If your meter does not work properly, check battery to make
sure that it is still good and properly inserted.
" will appear in the left-hand side of the
20