Temperature Measurements; Continuity Check - Craftsman 73756 Owner's Manual

Ac/dc true rms clamp meter
Table of Contents

Advertisement

TEMPERATURE MEASUREMENTS

1.
Set the function switch to the TEMP position.
2.
Insert the Temperature Probe into the
negative COM and the V· ·CAP·TEMP·Hz·
positive jacks, observing polarity.
3.
Touch the Temperature Probe head to the
device under test. Continue to touch the part
under test with the probe until the reading
stabilizes.
4.
Read the temperature on the display. The
digital reading will indicate the proper
decimal point and value.
5.
Use the MODE button to select
WARNING: To avoid electric shock, be sure the
thermocouple probe has been removed before changing to
another measurement function.

CONTINUITY CHECK

WARNING: To avoid electric shock, never measure continuity
on circuits or wires that have voltage on them.
1.
Insert the black test lead into the negative COM terminal and
the red test lead into the V· ·CAP·TEMP·Hz· positive terminal.
2.
Set the function switch to the
3.
Use the MODE button to select continuity "
icons will change when the MODE button is pressed.
4.
Touch the test probe tips across the circuit or component
under test.
5.
If the resistance is < 40 , a tone will sound.
o
o
F or
C.
position.
)
)
•)
)
•)
15
. The display
)"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents