Dc Voltage Measurements - Craftsman 73756 Owner's Manual

DC VOLTAGE MEASUREMENTS

CAUTION: Do not measure DC voltages if a motor on the
circuit is being switched ON or OFF. Large voltage surges may
occur that can damage the meter.
1. Insert the black test lead into the negative
COM terminal and the red test lead into the
positive V· ·CAP·TEMP·Hz· terminal.
2. Set the function switch to the V Hz position.
3. Use the MODE button to select DC Voltage.
4. Connect the test leads in parallel to the
circuit under test.
5. The clamp meter LCD will display the
reading.
11
V