3
Tighten the M2.0 x 5.0 screws to secure the battery to the computer.
4
Install the
base cover
5
Follow the procedure in
PCIe Solid State Drive (SSD)
Removing PCIe SSD card
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
NOTE:
3
To remove the PCIe SSD card:
a
Loosen the M2.0x3.0 captive screws that secure the SSD bracket [1].
b Remove the SSD bracket [2].
c
Remove the PCIe SSD card from the computer [3].
12
Removing and installing components
After working inside your
computer.
Before working inside your
If you have not removed the battery, you must connect the battery cable to the system board.
computer.