5
Install the:
a
battery
NOTE:
b
battery
6
Follow the procedure in
Smart card module
Removing smart card cage
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
PCIe SSD card
3
To disconnect the smart card cable:
a
Disconnect the smart card cable [1].
b Lift the smart cable that is affixed to the computer [2].
4
To remove the smart card cage:
a
Remove the M2.0 x 3.0 screws that secure the smart card cage to the computer [1].
b Slide and lift the smart card cage from the computer [2].
If you have not removed the battery, you must connect the battery cable to the system board.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
23