NOTE:
A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws.
4. Install the
base cover
5. Follow the procedure in
PCIe Solid State Drive (SSD)
Removing PCIe SSD
1. Follow the procedure in
2. Remove the .
3. Disconnect the battery cable from the connector on the system board.
4. To remove the PCIe SSD:
a. Loosen the M2 x3 captive screw that secure the SSD bracket [1].
b. Remove the SSD bracket [2].
c. Remove the PCIe SSD from the connector on the system board [3].
Installing PCIe SSD
1. Insert the PCIe SSD card into the connector.
2. Install the SSD bracket over the PCIe SSD card.
16
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.