Setting The Print Head Gap - Dascom LA650+ Quick Start Manual

Quick Start-en.book Seite 30 Freitag, 16. Oktober 2009 1:20 13
Settings

Setting the print head gap

Adjust Paprpath
Menu Char Online
1 2 3 4
Setup
TOF
Head Tear Online
1 2 3 4
Setup
Head= 0 *
Set < > Exit Online
3
1 2 4
Setup
30
The printer features automatic print head gap adjustment to the thickness of the pa-
per used. In setup mode, you can enter a correction value to modify the head gap
that is normally determined automatically. This correction is useful for modifying
the appearance of the type face. This correction will modify the appearance of the
font. It may be necessary to obtain optimum printing results on certain paper types.
The AGA (automatic gap adjustment) function must be set to "ON". For more de-
tailed information, refer to the User guide on the Online CD-ROM.
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the Head (1) key.
Use the < (2) or > (3) key to set the range within which the automatic gap adjust-
ment is to be corrected. You can select values in the range from -10 to +10.
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Negative values decrease the print head gap, positive values increase it. Changing
the automatically determined value may have a strong effect on the printing qual-
ity. The setting made will be retained after switching off the printer.
Quick start guide