Toshiba e-STUDIO2303AM User Manual page 158

5 VARIOUS FUNCTIONS
 Printing from a USB storage device
You can print PDF, JPEG or TIFF files saved in a USB storage device connected to this equipment.
 USB storage devices must meet the requirements below. However, some USB storage devices may
not be used with this equipment even though the requirements below are met.
- FAT16 or FAT32 format
- Single-partition (USB storage devices with multiple partitions are not supported.)
 Only files saved in the root folder of a USB storage device can be printed.
 Up to 99 files can be displayed in alphabetical order.
 Up to 20 characters of the file name can be displayed. The 21st and the subsequent characters are
displayed in dots.
 A JPEG file with a resolution is higher than 600 dpi cannot be printed.
 The compression format of TIFF files is compatible with JPEG/MH/MR/MMR.
 If photo images in a TIFF file have been printed in a grainy fashion, try carrying out the printing from a
client computer, and thus this phenomenon may be improved.
 Only PDF files that have been scanned with the same equipment in the BLACK mode can be printed.
 The encrypted PDF files cannot be printed.
 A paper size cannot be set for PDF files. They are printed in the size in which they are scanned.
 TIFF and JPEG files cannot be printed as being scaled according to the paper.
1
Connect a USB storage device to the slot of this equipment.
2
Select the paper size and set the duplex printing mode in [USB PRINT] of the USER
FUNCTIONS menu.
 P.150 "USB PRINT"
The paper size setting is disabled for PDF files as they are printed in the size in which they are
scanned.
3
Press the [JOB STATUS] button.
4
Press or
156 Job Status
to select [JOBS] and then press .