Chapter 1 Preparation; Description Of Each Component; Front / Right Side - Toshiba e-studio 165 Operator's Manual For Copying Functions

1 PREPARATION

Description of Each Component

Front / Right side

1. Platen Cover (optional, KA-1640PC)
Place an original on the original glass and start copying with this cover closed.
2. Reversing Automatic Document Feeder (optional, MR-3019) / Automatic Document
Feeder (optional, MR-2017)
A stack of originals placed on this are scanned one sheet after another. Maximum 100
sheets (or stack height 0.62") of originals can be placed in one go. (The maximum number of
sheets can be placed may vary depending on the media type of the originals.) 2-sided origi-
nals can be scanned with the Reversing Automatic Document Feeder (MR-3019).
P.54 "Placing originals on Reversing Automatic Document Feeder (optional) / Automatic
Document Feeder (optional)"
P.176 "Paper jams within Reversing Automatic Document Feeder (optional) / Automatic
Document Feeder (optional)"
3. Operator's Manual pocket (Back side)
Keep the Operator's Manual in this.
4. Side cover
5. Bypass tray
Use this to make copies on special media types such as thick paper, overhead transparen-
cies or tracing paper.
P.59 "Using Bypass Tray"
P.179 "Paper jams on bypass tray"
6. Paper feed cover (Upper: Paper Feed Unit / Lower: Paper Feed Pedestal)
24

Description of Each Component

12
11
10
9
8
1
2
3
4
5
6
7