Toshiba e-STUDIO2303AM User Manual page 13

1.PREPARATION
12.Power switch
Turns the power ON or OFF.
 P.17 "Preparation 1 - Turning Power ON"
13.Network interface connector
Use this connector when connecting this equipment to a network.
14.USB terminal (4-pin)
Connect to your PC using a commercially available USB cable.
 Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed mode (480
Mbps of transfer speed) certified by the USB Implementers Forum.
 Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a
USB hub, the equipment may not be recognized.
15.Scanning area
The data of originals transported from RADF are scanned here.
 P.178 "Regular Cleaning"
16.Original scale
Confirm the size of an original placed on the original glass.
1 PREPARATION
Components 11