F-Co Key Display Example; Key Menu - Panasonic KX-TD7690 Operating Instructions Manual

F-CO Key Display Example

1GDN[200]
key
2CO01
number
3Loop-CO
4DSS[1234]

Key Menu

The following keys can be activated using a display operation.
Key no.
Key
(default)
1
ICM
2
PAUSE
3
TRANSFER
4
HOLD
5 FWD/DND
6 MESSAGE
FLASH(RECALL)
7
8 AUTO ANSWER
CONFERENCE
TONE
• You can change the key menu assignment (see page 38).
Before Operating the PS
F-CO Key Condition
blank: idle
(On): You are using the line.
(flashing rapidly): You have an incoming call.
(flashing slowly): You have a held call.
(On): Others are using the line.
(flashing rapidly): Others have an incoming
(flashing slowly): Others have a held call.
Used to make or receive intercom calls.
Used to insert a pause between numbers.
Used to tranfer a call to another extention.
Used to place a call on hold.
Used to set the Call Forwarding or Do Not Disturb features.
Used to leave a message to the called party or call back the
message sender.
Used to disconnect a current call and make another call
without hanging up.
Used to answer an incoming call automatically.
Used to establish a multiple-party conversation.
Used to change the dialing mode to tone temporarily.
call.
Description
11