Programmable Function Keys - Barco ELM G10 Owner's Manual

10

Programmable Function Keys

What can be done with these keys
The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any
adjustment menu.
How can a Function Key be programmed ?
A function key can only be programmed when in the adjustment mode.
Handle as follow :
1. Scroll through the menus until the desired menu is reached.
2. Press the desired function key for this menu during a few seconds.
A confirmation menu will be displayed (menu 1) : "<F1> will be used to quickly access this menu".
3. Press ENTER to confirm.
4. The function key is available in the operational mode.
QUICK ACCESS
<F1> will be used
to quickly access
<ENTER> to confirm
<EXIT> to cancel.
menu 1
5976070 BARCO ELM G10 05052000
Downloaded From projector-manual.com Barco Manuals
PROGRAMMABLE FUNCTION KEYS
CONFIRM
this menu.
Programmable Function Keys
10-1