Safety Instructions For Installation - Miele KM 2312 Operating And Installation Instructions

Fit the wall units and rangehood before fitting the cooktop to avoid damaging
the cooktop.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.

The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

A gas cooktop must not be installed directly next to a deep fat
fryer as the gas flames could ignite the fat in the fryer. It is essential
to maintain a distance of at least 300 mm between these two
appliances.

When installing the cooktop, make sure that the gas hose and
electrical connection cable cannot come into contact with hot
appliance parts.

The electrical cable and any flexible gas connection pipes must be
installed in such a way so that they do not come into contact with
any moving kitchen parts (e.g. a drawer), and cannot become
trapped.

Observe carefully the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.

Safety instructions for installation

35