Operation; Switching On - Miele KM 2312 Operating And Installation Instructions


Fire hazard!
Do not leave the cooktop unattended
whilst it is being used.

Switching on

 The control for the burner required
must be pressed in and turned anti-
clockwise to the large flame symbol
to switch on. The ignitor will "click"
and ignite the gas.
When a control knob is activated, a
spark is generated on all burners. This
is normal and does not indicate a
fault.
 When a flame is visible, keep the
control knob pressed in for
5-10 seconds, and then let it go.
 If the burner does not ignite or goes
out, turn the control knob back to "".
Aerate the room or wait at least one
minute before trying again. Try
keeping the control knob pressed in
for a little longer the next time.
 If the burner does not ignite the
second time, turn the control knob
back to "" and see "Problem solving
guide".
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
 Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
 Hold the control pressed in and light
the gas at the burner with a match.
 Keep the control pressed in for a
further 5-10 seconds and then
release it.

Operation

25